Features:

• Six total inputs with a phantom powered XLR jack on channel 1
• 1/4” Main, Tape, Headphone & Aux outputs for flexible signal routing
• Perfect for musicians looking for a compact, capable mixer
• Mic input channel with gold plated XLR and balanced line input
• Two stereo input channels with balanced TRS jack
• High headroom circuitry offering extra dynamic range
• Ultra-low-noise discrete mic preamp with Phantom power
• Balanced inputs for highest signal integrity and low-noise operation
• Warm, natural two-band EQ on mono channel
• 2-Track inputs w/assignable bus: main mix or headphone out
• Highly accurate four-segment bar graph meters
• Aux inputs/outputs for external audio source integration
• Peak LEDs on each channel

Technical Information:

• Mono channel
• Microphone Input: Electronically balanced, discrete input configuration
• Frequency Response: 20 Hz to 22 kHz, +/-1 dB
• Distortion( THD&N): ≦0.005% at +4 dBu, 1 kHz
• Gain range: 0 dB to 44 dB (Mic)
• Maximum Voltage Gain: 74 dB Ch. Mic Input → Main Mix out & Tape out, 80 dB Ch. Mic Input → Control room & phones
• SNR (Signal to Noise Rate): ≧110 dBu
• Phantom power (Mic Pin2/Pin3 and Pin1): +18 V
• Line Input: Electronically balanced
• Frequency Response: 20 Hz to 22 kHz, +/- 1 dB
• Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
• Gain range: 15 dBu to 30 dBu

Stereo channels (Ch. 2 – 5)

• Line Input: Electronically balanced
• SNR (Signal to Noise Ratio): ≧110 dBu
• Frequency Response: 20 Hz to 22 kHz, +/- 1dB
• Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
• Gain range: 0 dBu
• Maximum Voltage Gain: 30 dB Ch. Line → Main Mix out

Impedance

• Microphone Input: 3.9 kOhms
• All Other Input: 10 kOhms or Greater
• Tape Out: 1 kOhms
• All Other Outputs: 120 Ohms

Equalization

• Mono channel: High ±15 dB @ 12 kHz, Low ±15 dB @ 80 Hz

Crosstalk

• Adjacent Input: ≦-80 dB @ 1KHz (Ch. 1 – 6)
• Input to Output: ≦-75 dB @ 1KHz (Stereo L/R, Ch. 1-4, Pan: panned hard left or right)

Main Mix Section

• Tape, Aux, Phones Output
• Output level: 0 dBu Unbalanced, 1/4″ Jacks, Max out +22 dBu Unbalanced, 1/4″ jacks
• Noise (Bus noise): ≦-90 dB @ 20 Hz ~ 22 KHz (channel & Main level at 0 dB, other at minimum, DSP mute)

Specifications:

• Power Supply: 18 V, 500 mA
• Rated Power Consumption: 9 W
• Dimensions (WxLxH): 128.1mm x 204mm x 38mm
• Weight: 1.65 lb